![](https://www.alphastarpaints.com/wp-content/uploads/2022/01/paint-bucket-2.png)
ALPHASTAR MATT EMULSION (ASME)
TECHNICAL INFORMATION Styrene Acrylic based Matt Emulsion
APPLICATION ASME finds application as a decorative coating with a Matt finish, highly recommended for interior applications It is enviromental and human friendly.
SPECIFICATION
Appearance Assorted Colors
Finish Matt
Solvent Water
Drying Time:
Surface dry 20 minutes at 27⁰C
Touch dry 1 hour 30 minutes
Hard dry 4 hours
SHELF LIFE (in can) 18 months minimum
Thinning Does not require extra thinning, as this may reduce the Coverage
Surface Preparation Prepare the surface for application by making sure it is dry, free of grease and other solvents
Physical/ Technical Data:
Coverage 7.0m²/litre on a porous surface, and up to 14m²/litre on
Smooth non porous surface
Application Tools By Brush/ Roller/ Air-less spray gun
Application Method Prepare the surface for application by making sure it is dry, and free from grease, solid particles, dirt, oily liquids and other foreign matter.
Stir the product well before use. With roller, brush or Airless spray gun, apply Alphastar Matt Emulsion to the surface that needs painting. Recoating Time. Allow to dry for 3 to 4 hours before recoating
Packaging This product is well packaged inside 20 litre buckets,well sealed from external contamination.
Storage Temperature Store at room temperature, in well ventilated environment. Temperature must not exceed 40⁰C
Precaution This product is Non-Toxic , Non-flammable and contains low level VOC(Volatile Organic Compounds).
DISCLAIMER All information contained in this data sheet, which can be changed without notice, is correct at the time of publication the company shall not be liable for any injury caused by improper use to which this product is put to for Health and Safety, Please always follow the caution on the label.