Physical/ Technical Data:
Coverage 1.7m²/litre on a porous surface
Application Tools: By foam, brush
Application Method Prepare the surface for application by making sure it is dry and free of grease and oily liquids. Stir the product well before use, with foam roller, apply Alphastar plus Texcote to the surface that needs painting.
Packaging: This product is well packaged in 20 litre buckets, well sealed from external contamination.
Storage Temperature: Store at room temperature, in well ventilated environment. Temperature must not exceed 40⁰C
Precaution: This product is Non-Toxic , Non-flammable and contains low level VOC (Volatile Organic Compounds). For more
Information on the safe handling, please refer to the Material
Safety Data Sheet (MSDS)
DISCLAIMER All information contained in this Website, which can be changed without notice, is correct at the time of publication
The company shall not be liable for any injury caused by
Improper use to which this product is put to for Health and
Safety, Please refer to the Material Safety Data Sheet and
Always follow the caution on the label.
ALPHASTAR PLUS TEXCOAT (ASPT)
TECHNICAL INFORMATION
Styrene Acrylic based Satin
APPLICATION ALPHASTAR PLUS TEXCOAT (ASPT)
finds application as a decorative satin coating, highly
recommended for interior application on screeded surfaces ,
wood and other less porous surfaces. It is environmental
and human friendly.
Advantages Lasting impression, high opacity and adequate coverage of wall imperfections, lasting resistance to fungi and algae attacks
SPECIFICATION
Appearance Assorted Colors
Finish Texture and Glossy
Solvent Water
Drying Time:
Surface dry 20 minutes at 27⁰C
Touch dry 1 hour 30 minutes
Hard dry 4 hours
SHELF LIFE: (in can) 18 months minimum
Thinning Does not require extra thinning, as this may reduce the
Coverage
Surface Preparation Prepare the surface for application by making sure it is dry, Free of grease and other solvents
